You'll need: Nothing to buy: all five are free to try from the pause menu's DEMO VEHICLES.
The machines you start with cover the whole job, but some jobs want a bigger or a smaller machine. These five are built and working, with the same physics, hydraulics and soil as the rest of the fleet, at their own size. They're demo vehicles: free to try from DEMO VEHICLES in the pause menu (Menu / Esc), where you can spawn as many as you like. Each one is saved with your site.
They drive like the machines you know, so the dozer and wheel loader guides apply to them too. Only what's different is here.
Step 1: The 21 t crawler dozer
A mid-size dozer between the 20 t and the 49 t, in slate blue-grey, with its cab set forward over the middle of the tracks.
- Blade: a 3.5 m semi-U blade that holds about 4 m³, on two lift cylinders and a tilt cylinder.
- No angle: the semi-U blade is held square by braces, so it lifts and tilts but doesn't angle. To spill to one side, tilt it.
- Power: 157 kW, turning a little harder than the 20 t for its longer track.
It's a good all-rounder for stripping and pushing up stockpiles when the 20 t's blade feels small.

Step 2: The 49 t crawler dozer
The big dozer for heavy stripping and long pushes, in oxide red, with a cast counterweight at the back.
- Blade: a 4.65 m semi-U blade holding about 13.5 m³: more than three times the 21 t's load.
- Lifts and tilts, doesn't angle, like the 21 t.
- Power: 325 kW on a long, heavy track, so it turns slowly. Plan wide turns and long straight passes.
Let the blade fill and keep the push straight: the semi-U's wings hold the load on the ends.

Step 3: The 7 t compact wheel loader
A small articulated loader for tidying round the plant, moving pallets of blocks and loading the small trucks.
- Drive: hydrostatic. The throttle pedal sets the travel speed (up to 20 km/h) and when you let it off the machine brakes itself. No gears, no converter.
- Bucket: 1.0 m³.
- Quick coupler: the bucket and the pallet forks are separate tools that stand on the ground when they're off the machine.
Swap the bucket for the forks
- Empty the bucket and lower it to the ground where you want to leave it.
- Hold LB (Left Shift) and press A (G): the coupler lets the bucket go and it stands there.
- Drive up to the forks, line the coupler up with them (tilt it to match and come in square), hold LB and press A again: the coupler locks on.

The forks carry what you slide them under by friction on the tines: the game's timber pallets with their bricks or blocks, and lock blocks. Lift gently and keep it low while you drive. Swap back the same way.

Step 4: The 52 t wheel loader
The big loader, sized to fill the 90 t haul truck in a few passes.
- Bucket: a 6.4 m³ rock bucket with teeth.
- Reach: a high-lift arm that dumps about 4.7 m clear, high enough to load over the 90 t truck's sides.
- Power: 405 kW through a three-speed powershift. It drives exactly like the 18.5 t, just slower to get going.

Step 5: Old Faithful, the 8 t excavator
A worn, rusty 8 t compact excavator that's seen a lot of work and keeps going. It's the 8 t compact excavator with a lot of years on it, listed in DEMO VEHICLES as 8 t excavator (Old Faithful).
- Arm: a 3.7 m boom, 1.9 m stick and a 0.76 m bucket. It digs and swings like the 20 t on the same controls, in a much smaller space.
- Dozer blade: a 2.3 m blade on the undercarriage. Press X (R) to raise it and B (G) to lower it: use it to backfill, level off, or brace the machine while it digs.
- Hauling: it's the machine the pickup's tag trailer is built for, also in DEMO VEHICLES. Hitch the trailer to the pickup (D-pad left / H in the pickup, or X / F at its coupler on foot), drop the ramps from behind (X / F), drive the 8 t up, and chain it down from beside the deck as you would on the lowbed.
Old Faithful is handy for hand-dug creek work, trenches, and digging round things the 20 t is too big for.



